Beeco is a complete electric motor and motor control distributor stocking fractional through medium voltage motors, and motor controls through 200HP. As a master distributor for Baldor and an advanced products distributor for Eaton, we also carry variable speed drives, sensors, PLC’s and counters. Our vendors allow us to meet the needs of our customers with products accepted and available worldwide. Our product lines continue to grow and we have the product knowledge and specialists to answer questions and develop systems for a wide variety of applications.

ATEX (Flameproof)

Manufactured by ABB, Cemp, Marathon

Available in either Zone 1 or Zone 2 classifications


Manufactured by Baldor, Teco, Reliance, and Marathon

Available from stock in 1-100HP. These cast iron motors meet automotive requirements for sound power levels.

Brake Motors

Manufactured by Baldor, Teco, Reliance, and Marathon

Brake motors may be used on machine tools, conveyors, door operators, speed reducers, hoists, or any application requiring wuick stops and positive holds.

Commercial Motors

Manufactured by Baldor, GE, and Marathon.

This definite purpose product lines is designed for certain applications requiring NEMA 48 and 56 motors rated between 1/4 and 1 HP, in both single and three phase ratings. Typical applications include: jet pump, heating & cooling, ventilation, Air conditioning, blowers, direct drive, condenser, and pedestal fans.

Explosion Proof

Manufactured by Baldor, Marathon, North American, Reliance, Tatung, and Teco

Explosion proof motors are used in applications where hazardous fumes or dust may be present. The motors are available in both single and three phase designs, form 1/4 to 300 HP. Can include standard foot mounted, C-face with base, and C-face less base, 60 Hz, jet pump motors, and inverter drive motors.

F-2 Mounting

Manufactured by Baldor, Teco, Reliance, and Marathon

We can take any motor and add F-2

Farm Duty

Manufactured by Baldor, Teco, North American, Marathon, and Reliance

These motors are designed for varied farm applications. Designs include motors suitable for aeration fans, auger drives, grain stirring, metering pumps, instant reversing, irrigation tower drives, and crop driers. General purpose motors are also available in both single and three phase, TEFC and open drip proof construction.

General Purpose

Manufactured by Baldor, Marathon, Reliance, Tatung, and Teco, North American

General purpose motors are available in open drop proof and TEFC construction in both single and three phase. Sizes from 1/12 to 1500 HP are available. These general purpose motors are for use in a variety of applications such as compressors, pumps, fans, conveyors, material handling, machine tools , and many others. Also available are stock motors which are direct replacements for the motors built since 1952. NEMA frames.


Manufactured by Baldor, Marathon, Reliance, Teco

Ranging in size from 1/4 to 75HP and include heavy duty industrial designs as well as designs for commercial applications. These applications include ventilators, direct drive and belted fans, exhaust fans, unit heaters, air conditioning units, and commercial refrigeration condensers. Also included are motors designed especially for use with variable torque electronic controls that are use to conserve electricity.

Inverter Duty

Manufactured by Baldor, Marathon, North American, Reliance, Teco, and Tatung

Inverter duty motors are wound with 200° C moisture resistant ISR (Inverter Spike Resistant) magnet wire which dramatically extends the life of the motors compared to motors wound with non-ISR wire. The motors available from stock range in sizes 1/3 to 500 HP. These motors are designed for applications where up to 2000:1 cibstabt torque speed range is required. Applications include conveyors, pumps, fans, metal processing, compressors, test stands, and material handling equipment.

Marine Duty

Manufactured by Marathon, Teco, Reliance, Tatung

Marine Duty Types 1,2, and 3
ABS certified
DNV certified

Medium Voltage Motors

Manufactured by Teco, Marathon, Baldor, Reliance, GE

Horizontal and vertical medium/high voltage motors from
2300/4160 6600 and 13.8KV.


Motors can be built to IEC or NEMA standards.

Standard features:
· Copper bar rotor
· VPI insulation
· Low noise construction
· Proper bearing selection based on design and application


Manufactured by Baldor, Marathon, Reliance, Cemp, and ABB

Metric dimension motors are designed in IEC frames from D63 through D200L. The motors are available from stock in 50Hz or 60 Hz. This means that replacement 60Hz motors are readily available from stock to replace metric motors that have failed on imported machinery. Motor construction meets IP54 and includes motors with B3 base mounting, B5 Flange mounting, or B14 Face mounting. Stock motors range in size from .18kW to 30 kW. Typical applications for this product include pumps, fans, conveyors, machine tools, gear reducers and any other jobs that requires IEC frames.

Premium Efficiency

Manufactured by Baldor, Teco, Reliance, Marathon, and Tatung

These premium efficiency designs are available in both TEFC and Open Drip proof construction. All 3-phase motors are inventory ready per NEMA Standard MG1, Part This means the motors in 230v and 460v meet NEMA’s corona inception voltage requirements and can withstand peak voltages up to 1600v. Motors having premium efficiency are also available in single phase.

Pressure Washer

Manufactured by Baldor and Reliance

These single phase motors are available in both TEFC and open drip proof construction. Industrial quality with 200° C, moisture resistant wire, the motors have UL and CSA recognized component approvals. NEMA frame sizes include 56 through 184 in rigid base only or NEMA C-face with base.


Manufactured by Baldor, Marathon, North American, and Reliance

Pump motors include single or three phase jet pump motors, square flange motors, close-coupled pump motors, and P-base vertical solid shaft pump motors. The motors are stocked in TEFC, open drip proof, and many explosion proof ratings. Applications for these motors include a wide range, from swimming pool pumps to medium and high thrust in-line pumps used in water treatment plants. Horse powers range in size from 1/3 through 75 HP.


Manufactured by Baldor , and Reliance

Designs are available having either firite or rare earth magnets.

Severe Duty

Manufactured by Baldor, Marathon, North American, Reliance, Tatung, and Teco

Severe duty motors are available in 1-500HP. These products are especially designed for those applications requiring protection of the motors from severe environmental operating conditions. A few typical applications which might require these types of motors include petrochemical plants, mines, foundries, pulp and paper plants, waste management facilities, rock crushers, and chemical plants.

Vertical Hollow & Vertical Solid Shaft

Manufactured by Marathon, Tatung, North American

Beeco offers Vertical Hollow Shaft High Thrust Motors with the following
premium features as standard:
* 460 volts
* 1.15 SF
* Class F insulation with a B rise
* Non reverse ratchet standard (ccw rotation)
* Cast iron
* Oil lubricated thrust bearings 320 frame and above
* Suitable for VFD 4:1 speed range
* 115 volts space heater
Beeco also offers Vertical Solid Shaft motors in low, medium, and high voltage in several enclosures, WPI, WPII, TEFC, TEAAC, and TEWC.
HP ranges from 3HP to 10,000 HP in a wide range of RPM’s. Call for complete specifications.

Vertical Pump Motor

Manufactured by North American, Reliance, Tatung

Stocking VHS high thrust motors from 5HP to 250 HP in 4 and 6 pole TEFC 3/60/460 volts

Custom VSS motors in various enclosures (WPI, WPII, TEFC, TEAAC, TEWAC) in voltages 460, 4160, 6600, 13.8 Kv in either 50 or 60 Hz. Motors designed for your individual application.